SpeedFactory Racing Angled Oil Catch Can with built in Coolant Overflow Tank SF Parts If you are not sure

If you are not sure if these studs are compatible with your engine

You must run at least a -12AN feed line and a large bodied pre-filter (we run a Weldon with 100 micron stainless steel element) to maximize filtering surface area without causing a restriction

and it is best to use -12AN line for return to the fuel cell to avoid fuel pressure climbing over a 1:1 ratio due to flow restriction on the return side

Center to Center Length: 136

Included are (5) stainless steel 3/8” diameter hangers that are fitted with an oversized 1/2” stainless sleeve to provide a tight fit inside your OEM rubber exhaust hanger insulators

SpeedFactory Racing Angled Oil Catch Can with built in Coolant Overflow Tank SF Parts If you are not sureThe SpeedFactory Racing Angled Oil Catch Can with built in Coolant Overflow Tank is specifically designed for forced induction and heavily modified naturally aspirated engines. This breather setup is engineered to provide the sufficient crankcase ventilation your high performance engine needs, and also condenses crankcase blow by oil and moisture correctly. The factory PCV system is replaced and all oil vapors are vented to the atmosphere through the