004: PL-200/8 Sensor Board (Shipment 15th of August 2026) The voltage reading of the

The voltage reading of the LiPo is optimized for up to 14S LiPo packs

Power-Cube 3 "V3" with 3 outputs 2x 5

There is a small PCB included into the main wire which implements a current control mode

If you need a customized cable in different lengths

The output voltage can be customized

004: PL-200/8 Sensor Board (Shipment 15th of August 2026) The voltage reading of theUser Manual: DOWNLOAD 200A Current Voltage measurement sensor board, based on Allegro Hall Sensor ACS770 250U. Voltage range is up to 14S (60V) with solder bridge open and up to 7S (30V) with solder bridge closed. Please check the manual page for more details. This Sensor board connects directly to any Premium Line BEC or Sensor Hub X2 V2. Connected to the sensor are 2x15cm 8AWG wire (red) as a standard. REM: The connector is Molex Clik Mate 1. 25mm